Tuesday, March 2, 2021  
- DTN Headline News
Dicamba Rules Update - 1
By Emily Unglesbee
Tuesday, March 2, 2021 8:45AM CST

ROCKVILLE, Md. (DTN) -- For the fourth time in five years, farmers and applicators face a new set of requirements to spray dicamba over the top of dicamba-tolerant crops.

The stakes for getting it right remain high. Parts of the Midwest and South have seen many consecutive years of off-target dicamba injury to a broad array of crops and plants. This year, dicamba-susceptible soybean acres are projected to increase, as well, with Corteva Agriscience estimating that susceptible Enlist E3 soybeans alone could account for more than 30% of all U.S. soybean acreage in 2021.

In this series of articles called Dicamba Rules Update, DTN explores EPA's changes to new, five-year registrations of three dicamba herbicides: XtendiMax (Bayer), Engenia (BASF) and Tavium (Syngenta). (Corteva has decided not to seek a new registration for its dicamba herbicide, FeXapan.)

Here are the primary areas the series will explore:

1. NEW CUTOFF DATES

For the first time, EPA has established two federal cutoff dates for use of the three dicamba herbicides: June 30 for soybeans and July 30 for cotton.

For Engenia, those cutoff dates are the only spray timing restriction. The XtendiMax label also tells applicators not to spray the product beyond the R1 growth stage in soybeans, and Tavium's label bans applications after V4 in soybeans and the 6-leaf stage in cotton.

However, once again, dicamba cutoff dates will vary by state in 2021. Three states have opted to create more restrictive dates, either by state rulemaking or via relevant state laws. (See more here: https://www.dtnpf.com/…).

As of the time this article was posted, here are the cutoff dates growers may face in the following states:

-- Arkansas: May 25.

-- Indiana: June 20.

-- Illinois: June 20, with an additional 85-degree-Fahrenheit temperature restriction.

Other states, such as Alabama, North Carolina, Mississippi, Oklahoma and Texas are working to develop Section 24(c) special local needs labels to extend the federal cutoff dates to accommodate late-planted soybean and cotton fields. Check with your local state department of agriculture for any local restrictions or additional uses of these three herbicides before spraying.

2. BUFFERS GET BIGGER

The new labels include expanded buffers designed to limit off-target movement. The first required buffer, a 240-foot downwind buffer, is necessary for every dicamba application.

The second buffer requirement is a 57-foot omnidirectional buffer, combined with a 310-foot downwind buffer to protect endangered species. This buffer is only required for fields in counties that have been listed on EPA's Bulletins Live! Two website, because they house federally recognized endangered species.

Do not assume that if a county didn't surface on this website last year, it won't be on the list this year. The EPA has adjusted its listing of counties with endangered species in several states for 2021, and dicamba applicators are required to document that they checked this website before spraying. See it here: https://www.epa.gov/….

Soybean growers have the option of reducing the downwind buffer to 110 feet and the endangered species buffer to 240 feet, if they used a qualified hooded sprayer option that can be found on each product's website (see below).

3. NEW TANK MIX REQUIREMENTS

None of the three newly labeled dicamba herbicides can be used alone; all must be accompanied in the tank with a volatility-reducing adjuvant (VRA) designed to keep the tank mix's pH at or above 5, which research shows lowers the risk of volatility.

If an applicator wants to tank mix other active ingredients, such as herbicides, insecticides or fungicides, with XtendiMax, Engenia or Tavium, they must first check the list of approved tank mix options and determine if it is an approved tank mix partner and if it requires the additional use of a drift reduction agent (DRA).

Applicators can find the approved VRAs, tank mix options and their DRA requirements on each herbicide's website:

XtendiMax: https://www.xtendimaxapplicationrequirements.com/…

Engenia: https://www.engeniaherbicide.com/…

Tavium: https://www.syngenta-us.com/…

4. SAME OLD, SAME OLD

Remember that many parts of the new dicamba labels remain the same. That means only certified applicators can apply the three dicamba herbicides, which remain restricted-use pesticides (RUPs).

Dicamba or auxin-specific training is required annually for all dicamba applicators using these newly labeled herbicides. If your state provides dicamba training sessions, applicators must take those. If your state doesn't offer them, applicators must seek training from the dicamba registrants -- Bayer, BASF or Syngenta.

Due to the pandemic, some states and companies are offering online-only training. See more here: https://www.dtnpf.com/….

Applicators must keep applications within 3- to 10-mile-per-hour wind speeds, at sprayer speeds at or below 15 mph, and with boom height no more than 24 inches above the crop canopy. If the wind is blowing toward a sensitive crop or area, shut the sprayer off.

Dicamba applications are also still prohibited within 48 hours of a heavy rain forecast, as well as during temperature inversions. Spray windows are limited to one hour after sunrise and two hours before sunset.

In addition to checking the Bulletins Live! Two website, applicators are still required to check a sensitive crop registry, such as Field Watch, for each field before applications.

As for tank mixes, AMS (ammonium sulfate) and non-approved nozzles are still banned from use with these herbicides, and triple-rinse cleanout procedures are still required.

Finally, applicators are still required to generate records of all the label requirements within 72 hours of an application and hang on to those records for two years.

For a handy chart that breaks down the changes in the new dicamba labels, see this DTN story here: https://www.dtnpf.com/….

Emily Unglesbee can be reached at emily.unglesbee@dtn.com

Follow her on Twitter @Emily_Unglesbee


blog iconDTN Blogs & Forums
DTN Market Matters Blog
Editorial Staff
Monday, March 1, 2021 10:39AM CST
Friday, February 26, 2021 11:00AM CST
Monday, February 22, 2021 8:57AM CST
Technically Speaking
Editorial Staff
Monday, March 1, 2021 8:50AM CST
Monday, February 22, 2021 8:21AM CST
Tuesday, February 16, 2021 9:38AM CST
Fundamentally Speaking
Joel Karlin
DTN Contributing Analyst
Friday, February 26, 2021 7:10AM CST
Wednesday, February 24, 2021 9:07AM CST
Tuesday, February 23, 2021 10:18AM CST
DTN Ag Policy Blog
Chris Clayton
DTN Ag Policy Editor
Tuesday, March 2, 2021 1:45PM CST
Monday, March 1, 2021 4:06PM CST
Thursday, February 25, 2021 7:01AM CST
Minding Ag's Business
Katie Behlinger
Farm Business Editor
Tuesday, March 2, 2021 1:00PM CST
Wednesday, February 24, 2021 3:51PM CST
Thursday, February 11, 2021 4:33PM CST
DTN Ag Weather Forum
Bryce Anderson
DTN Ag Meteorologist and DTN Analyst
Tuesday, March 2, 2021 12:02PM CST
Thursday, February 25, 2021 10:56AM CST
Tuesday, February 23, 2021 12:59PM CST
DTN Ethanol Blog
Editorial Staff
Tuesday, March 2, 2021 3:35PM CST
Friday, February 26, 2021 12:21PM CST
Friday, February 19, 2021 8:22AM CST
DTN Production Blog
Pam Smith
Crops Technology Editor
Tuesday, February 23, 2021 10:06AM CST
Friday, February 19, 2021 12:04PM CST
Monday, February 8, 2021 2:16PM CST
Harrington's Sort & Cull
John Harrington
DTN Livestock Analyst
Monday, March 1, 2021 5:05PM CST
Monday, March 1, 2021 5:05PM CST
Monday, February 22, 2021 3:23PM CST
South America Calling
Editorial Staff
Thursday, February 25, 2021 12:58PM CST
Thursday, February 18, 2021 12:20PM CST
Thursday, February 11, 2021 4:51PM CST
An Urban’s Rural View
Urban Lehner
Editor Emeritus
Monday, March 1, 2021 9:39AM CST
Friday, February 19, 2021 5:10AM CST
Wednesday, February 10, 2021 12:05PM CST
Machinery Chatter
Dan Miller
Progressive Farmer Senior Editor
Friday, February 26, 2021 11:20AM CST
Thursday, February 18, 2021 3:46PM CST
Friday, February 12, 2021 2:03PM CST
Canadian Markets
Cliff Jamieson
Canadian Grains Analyst
Tuesday, March 2, 2021 3:46PM CST
Monday, March 1, 2021 4:18PM CST
Monday, March 1, 2021 4:18PM CST
Editor’s Notebook
Greg D. Horstmeier
DTN Editor-in-Chief
Thursday, December 31, 2020 8:57AM CST
Wednesday, December 2, 2020 12:37PM CST
Friday, September 4, 2020 3:48PM CST
 
Copyright DTN. All rights reserved. Disclaimer.
Powered By DTN